• Justpressprint 3d printed Mixer
  • Justpressprint 3d print Mixer STL arrangement in zip

This is a simple hand powered mixer.

While holding the “fork” and top you easily mix ingredients into the mix.

The Mixer should be printed with HS-PLA (High strenght-PLA) if you want it to survive the dishwasher.

Prints in about 130 minutes @ 0,2 mm layer height, 20 % fill, 50 mm/s with a 0,4 mm nozzle.

3d-modeling & design by EE
Model bound by the CC BY-NC-SA 3.0 License


Click and move around